Find Water Cool Chiller Professional, Water Cooled Chiller, Water Cool Chiller System on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Water Cooled Chiller > Box-type Water Cooled Chiller > 15 HP Industrial Water Cooled Chiller

15 HP Industrial Water Cooled Chiller

Basic Info

Model No.: TY-15W

Product Description

When installing a water-cooled chiller, be sure to choose an area with a flat, solid ground that can bear the weight of the unit and a good ventilation environment. Vibration damping and stabilization measures should be taken for chillers, water pumps and cooling towers to avoid vibration shifts caused by unit startup. The diameter of the water pipe connecting each equipment should match the equipment. At the end of the chiller, a clear condenser tube bundle should be left with a pipe space to facilitate the later maintenance of the chiller,Packaged Water Cooling Chilling Equipment,Box-type Water Cooling Chilling Equipment,Box-type Water Cooling Chiller Machine,Box-type Water Cooled Chiller,Open-type Water Cooled Chiller.

Before using a water-cooled chiller, the operator must have certain operating knowledge and basic experience. If not, the personnel must be prohibited from using it. Before use, the operator needs to read the instruction manual of the device in detail, and strictly follow the content inside, especially the initial installation and commissioning work. The more important one is: the use of power supply. The standard power design of Dongyuejin chiller is 3-phase 380V 50HZ, and the 1hp chiller / 2hp chiller is 220V 50HZ.



Introduction

We offer a variety of water cooled chillers that suit a wide range of industries. Industrial water cooled chillers are generally used for large capacity application, where the heat generated by air-cooled chiller may cause problems. They are also chosen when a cooling tower is already in place, or where the customer requires optimum efficiency of power consumption.


Our water-cooled industrial chillers are widely used in plastics industry, where precise temperature control is required to cool molds and achieve higher quality of product. They are also used for numerical-controlled (NC) lathes, die-casting machines, lasers, foodstuff and medical apparatus, and plating process machines. The moveable characteristics are best for machine side cooling.


Our portable water-cooled chillers contain all of the necessary components: refrigeration circuit, water reservoir, and the water pump.Each is equipped with Copeland/Panasonic scroll compressor, Siemens/LS electrical components, and shell-and-tube type heat exchanger to maximize efficiency and reliability. Our industrial chillers are designed for indoor use only.


Our water-cooled chillers provide high quality, operation efficiency, energy savings, superior reliability and long service life. They are also designed to use low Global Warming Potential (GWP) refrigerants and help lower environmental impact to next-generation.

Features

  • Accurate Temperature Control
  • Equipped with precise digital temperature controller and LCD display. Water temperature ranges from 41℉ to 86℉.
  • High Efficiency
  • Equipped with shell-and-tube type evaporator and condenser, which are designed with the internal threaded copper tube for high efficient heat exchange to save over 30% energy.
  • Outstanding Durability & Low Operating Costs
  • Equipped with high quality compressor, evaporator, condenser and water pump for ultra-powerful refrigeration, with low noise, power-saving and prolonged service life.


  • Perfect Safety Protection
  • Equipped with sensitive alarm and control system, which has compressor protection, over current protection, high/low pressure protection, over temperature protection, flow switch, phase sequence/phase missing protection, low coolant level protection, anti-freezing protection , exhaust overheat protection, etc.


  • Easy Setup & Operation
  • Equipped with auto analysis function and user friendly interface for easy supervision and operation. No complex installation requirements except for basic inlet & outlet connections.


  • Easy Maintenance
  • Equipped with open-type stainless steel water tank and built-in auto filling water devices, convenient for cleaning and maintenance.


Technical Details 15 Tons Industrial Water Cooled Chiller
Nominal Cooling Capacity (BTU/H)
180000
Maximum Power Consumption (kW/h )
12.75
Power Supply
460V 60Hz 3PH
Full Load Amps (A)
30
Ambient Temperature (℉)
≦ 104
Temperature Setting Range (℉)
41 - 86
Compressor Type All-close Scroll
Compressor Power (kW)
5.625 x 2
Compressor Quantity
2
Water Flow Regulator Thermal Expansion Valve
Chilled Water Flow (GPM)
44.4
Chilled Water Pressure (PSI)
5.8 - 14.5
Cooling Water Flow (GPM)
55.5
Cooling Water Pressure (PSI)
4.4 - 8.7
Water Pipe Diameter (inch) 2"
Refrigerant
R-407C
Refrigerant Filling Amount(lb)
19.8
Water Pump Power (kW) 1.5
Water Pump Head (ft) 59.4
Water Pump Quantity
1
Water Tank Capacity (us gal) 87
Dimensions (L x W x H) (inch) 66" x 32" x 59"
Gross Weight (lb) 882

water cooled chiller TOYOCOOLwater cooled chiller water cooling


Contact us if you need more details on Water Cool Chiller Professional. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Cooled Chiller、Water Cool Chiller System. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Cooled Chiller > Box-type Water Cooled Chiller